CALL US: 1-800-445-0624
Most Viewed
 
document Sun Angel 600 External Display
To change the LED configuration of the external display, you must first enter the presetting mode. Go to parameter 245 and select the value...
rating 25 Feb, 2015 Comments: 0
document E032 on a Classic
This error refers to an open safety switch of the safety loop for all the acrylics and the tank.  It could be cause by either of the canopy,...
rating 25 Feb, 2014 Comments: 0
document E132 on Sunangel Duo 1400
Error 132 refers to the start-up inspection of the UV sources.  There could be numerous causes that would generate this error: ...
rating 14 Feb, 2014 Comments: 0
document Electronics III Audio Connection
The attached document shows the proper connection for systems with Electronic II components.
rating 21 May, 2013 Comments: 0
document Issue: Tanning System immediately goes to dirty mode when Start button is pressed
A tanning system that is equipped with an Intelitan 3-button timer and shuts off immediately at the beginning of a session may be...
rating 21 May, 2013 Comments: 0

Recent Articles
 
document Sun Angel 600 External Display
To change the LED configuration of the external display, you must first enter the presetting mode. Go to parameter 245 and select the value...
rating 25 Feb, 2015 Comments: 0
document E032 on a Classic
This error refers to an open safety switch of the safety loop for all the acrylics and the tank.  It could be cause by either of the canopy,...
rating 25 Feb, 2014 Comments: 0
document E132 on Sunangel Duo 1400
Error 132 refers to the start-up inspection of the UV sources.  There could be numerous causes that would generate this error: ...
rating 14 Feb, 2014 Comments: 0
document Issue: Tanning System immediately goes to dirty mode when Start button is pressed
A tanning system that is equipped with an Intelitan 3-button timer and shuts off immediately at the beginning of a session may be...
rating 21 May, 2013 Comments: 0
document Electronics III Audio Connection
The attached document shows the proper connection for systems with Electronic II components.
rating 21 May, 2013 Comments: 0